The vacuum emulsifying mixer consists of a lot of different components. The composition of the vacuum has a lot of sub-equipment inside the vessel that does work like emulsifying and stirring. The following are the significant components of the vacuum emulsifying mixer, which all play different roles in the emulsification process.
◎ Mixing Vessels
Scrubbers can easily operate the vessel because the inside shape is like a circle. The material can charge to a maximum of 90% with a standard charge simultaneously as the vessel’s maximum capacity. We are ready to build vessels based on your request.
◎ Standard Type
Presswork produces the head plate at the bottom of the mixing tank. Giving off heat changes the shape of the inside pressing method, which has a smooth interior within the mix tank.
◎ Hemispherical
A high degree of agitating indicates a high level of proficiency. Material measures apply to single-edge conditions. Direct heat is less than at any other time, and agitating with low strength is more productive. Even so, it might be possible to move a limited number of materials.
◎ Agitating Parts
• Agitating Tools
Choose the type of blade and the speed that works best for your needs. It has a rotation recorder and a tachometer on it. You can also change the speed at which things rotate. The shaft portion has high-quality oil sealing under particular safety systems.
• Scraping Tools
The scraper should move or circulate the heated or cooled product by vessels within the wall to provide an efficient heat exchange with a heat-conductive surface. The inside of the vessel is round, making the scraping blade and heat exchange work better. You may take off the scraping blade with a simple swipe of the finger. Teflon, neoprene, and nitrogen rubber are applicable. You can select the material best suited for your application.
◎ Higher Shear Mixer
It’s becoming more common to spread and mix materials as evenly as possible without specialists; Because these quick-slashing blends are used most of the time. Some features are common to all models; A turning cutting edge resembles a turbine. It is It is possible to obtain a fine dispersion quickly by creating a lot of disruption and percussion.
• Homo Quick Mixer
When materials pass between the turbine vanes and the stator, it gets emulsified and spread out. For more slashing power, you can use a special seal. And set the blender’s speed to the highest 10000 rpm. Nevertheless, the reverse homo blender can be replaced by the suck-down homo blender. With this, the vessel begins to circle rapidly, indicating a high success rate for scattering power.
• Scattering Mixer
The scattering mixer has very sharp edges, and its blades are circular disks. The powder product spreads out fast into a fluid, and powder chunks are cut to speed up the process; And pounded equally. The serrated blade spreads the powder, distributing the fluid evenly.
• Ultra Mixer
The ultra-mixer can get rid of all kinds of excess that fall into the blender. It has the same scratching power as a rotating hood but a higher cavitation level. The ultra-blender works by pounding the material; powder. It is additionally used for very thick materials and cleaves very well.